Knowledge of the best camping knots will have you slinging hammocks up, doing makeshift tent repairs and engaging in all manner of other tricks.

In the long run, it’s far better to invest a little time practising how to tie some the best camping knots properly – especially if you’re a keen hiker, backpacker or spend a lot of time in tents. In fact, if you spend much time at all in the great outdoors, a bit of knot knowledge can be as useful as knowing how to use a compass or how to pitch a tent.

1. Bowline

(pronounced, somewhat counter intuitively, as ‘bo-lin’) is a classic knot from the age of sail that is used to tie a fixed loop in the end of a rope. Once formed, the loop won’t tighten or slip, so it can be safely tied around a person’s waist, making it a useful rescue knot. The fact that the bowline is reliable under load means it is used in aviation for tying down light aircraft as well as in modern sailing for securing sheets and sails. It’s a great knot to use around camp for fixing guy lines to your family tent or holding down a flapping camping tarp.

The easiest way to tie it is to imagine the working end of the rope as a ‘rabbit’, and the standing part as a ‘tree trunk’. First, make a loop in the standing part to form the ‘rabbit’s hole’. Then the ‘rabbit’ comes up out of its hole, around the tree, then back down the hole. Scouts and Guides are often taught this method with the mnemonic rhyme: ‘Up through the rabbit hole, round the big tree; down through the rabbit hole and off goes he.’

2. Alpine butterfly loop

This multi-purpose climbing knot comes in handy whenever you need to make a fixed loop in the middle of a rope. It can be tied even if you don’t have access to either end of the rope. It is also a good way to shorten a length of rope, or for safely isolating a frayed or damaged section. And when modified slightly to form a butterfly bend (which is the same knot but is tied using two ends of a rope instead of a bight), you can even use it to join two ropes together. All of which makes this an extremely versatile knot. Best of all, it is easy to tie too.

The easiest way to do so is via the ‘hand-wrap’ method. Wrap the rope around your hand twice. At the end of turn one, position the rope close to your fingertips. Continue around and complete turn two back near your thumb. Pick up the turn near your fingertips. Wrap it around the other two turns. Slide the knot off your hand and tighten by pulling on the loop and the ends.

3. Adjustable grip hitch

From loops to hitches now – a friction hitch, to be precise. The adjustable grip hitch is a simple but extremely useful hitch that will hold tight under tension but can easily be shifted up and down the rope while slack. That makes it ideal for pulling a guy line taut when fixed to a tent peg or for stringing a ridge line when pitching a tarp, something you will probably want to do when erecting your one-person tent in the wild. In this regard, it does the same job as better-known knots like the taut line hitch or midshipman’s hitch, but in our experience the adjustable grip hitch tends to hold better in a wider variety of settings.

What makes this one of the best camping knots is that it is easy to tie – just pass the working end around a tether, like a tent peg or a tree. Wrap the working end twice around the standing part. Then take the working end around both ropes, tuck it under itself, and tighten the knot. To pull it tight, slide the whole knot along the standing part. It will ‘grip’ the rope and remain taut when you release it. If you need even more grip on the line, for example if using a slippery synthetic rope, add an extra turn when you first start the knot, which will increase the friction.

4. Trucker’s hitch

The trucker’s hitch is a compound knot that is used whenever you need to pull a rope really tight – eg when securing a load on the bed of a truck, hence the name. It basically works as a crude block and tackle, giving you additional purchase to cinch in and tension a rope effectively. In other words, it’s the ratchet strap of the knot world. As such, it is a very useful knot for both everyday use and outdoor adventures, whether you’re lashing your folded up camping chairs together or transporting timber home from the DIY store.

As a compound knot, it is tied in two stages. First, you need to make a loop in the standing part of the rope. This can be done in any number of ways, from a simple slipped overhand loop to a fixed loop, like the Alpine Butterfly (see knot number 2). Then take the working end of the rope around an anchor point and pass it through the loop you have created. Then pull as hard as you can until the load is firmly locked down. Secure the rope with a couple of half hitches. Alternatively, to make it easier to untie and prevent jamming, use slipped hitches or a friction hitch.

5. Double fisherman’s knot

Despite its name, this knot is now more commonly used in climbing than fishing and we reckon its definitely one of the best camping knots too. It is a type of bend – that is, a knot used to join two ropes together. It’s very reliable in this role, which is why it is also the knot most frequently tied by climbers to create loops of cord (cordelettes or prussik loops) used to build belay anchors or as a safety device when abseiling and rappelling.

But for hikers, campers and backpackers, it’s a great way to make carrying loops or grab handles for bits of equipment that might otherwise get lost. Think about it – how many bits of kit have a handy lanyard hole in them? But how often do you actually bother to attach one? Well, now you can. In addition, the double fisherman’s knot is a good way to fix a broken bootlace or to make a ridge line from two lengths of paracord that are just that fraction too short. It’s also a great knot to use for tying a compass, GPS unit or map case around your neck, because it can be pulled apart to adjust the length of the lanyard.

It’s pretty simple to tie too, consisting essentially of two double overhand ‘strangle’ knots that pull against each other along the length of the rope. First, lay the ends of the rope or cord parallel to each other. Pass the working end of one rope twice around the standing part of the second rope and pass it back through the inside of the turns. Repeat with the working end of the second rope, tying it around the standing part of the first rope. Pull the rope ends to tighten knots (you don’t need a long trail), then pull the standing parts to slide the knots together.

6. Prussik

There are various types of prussik knots, but they are all used for the same purpose: to secure a loop of cord to a taut line. The prussik slides along the line when not weighted but jams solidly upon loading, just like a friction hitch. The classic prussik is a neat knot that will slide in both directions. It’s widely used in climbing but is super useful in camp for hanging flashlights, lanterns and other bits of kit from a suspended ridge line. It also comes in handy when pitching a tarp for a shelter, as it means you can pull the tarp tight along the ridge line.

If you’ve tied a double fisherman’s knot in a short length of cord to create a sling or loop, you can now attach it to another length of rope using a prussik. First, pass the cord around the rope and through itself, making sure the double fisherman’s knot is out of the way. Wrap the cord around the rope and through itself again, making three wraps in total. Pull the cord tight and ensure the knot is neat.

You can now hook a lantern or clip a carabiner through the loop. Simply pinch the knot to loosen it off and slide it along the rope. Weight the knot in either direction to lock it. If the knot jams, you can push some cord in from the centre loop of the knot to loosen it.

In Conclusion

You'll be the toast of the campsite. “If you can’t tie knots, tie lots,” as the old adage has it. Well, that’s all very well, but it makes for a messy camp, and nor is it much fun when you have to spend hours untying a tangled mess of rope or line. Practice, practice.... Go Camping!

* Essential Campknots

free e-book DownLoad - Knots, Splices and Rope Work .zip